LIQUID RUBBER VEZLAR MSDS
MATERIAL SAFETY DATA SHEET

THIS PRODUCT IS NOT SUBJECT TO THE CONTROLLED PRODUCTS OR
THE TRANSPORTATION DANGEROUS GOODS REGULATIONS
SECTION 1 MATERIAL IDENTIFICATION
TRADE NAME: Liquid Rubber Vezlar
CHEMICAL FAMILY: Water suspension of petroleum derived hydrocarbons (polymer modified emulsifed asphalt) and inert fillers.
MATERIAL USE: Protective Coating
T.D.G. CLASSIFICATION: NON REGULATED
WHIMIS CLASSIFICATION: NON REGULATED
EMERGENCY TELEPHONE (07) 55 765 322

SECTION II HAZARDOUS INGREDIENTS
COMPONENT CAS# % (BY MASS) LC50 (ppm) LD50 (mg/kg)
(rat inhal) (rat oral)
Complex mixture n/a 40-70 n/a n/a
of bitumens
anionic surfactants n/a 0.5-2.0 n/a n/a
water 7732-18-5 30-60 n/a n/a
Polymer dispersion 5-25 n/a n/a

LIQUID RUBBER VEZLAR MSDS
SECTION III PHYSICAL PROPERTIES
Odour and appearance: Brown liquid, slight resinous odour.
Odour threshold: n/a
Specific gravity: 1.00 (approx.).
Coefficient of water/oil distribution: n/a
Vapour pressure (mm Hg): 17 @20°C (water)
Boiling point: 100°C (water)
Freezing point: 0°C
pH: 7-13
Vapour density (air = 1): >1
Evaporation rate (nBuAcetate = 1): <1
Volatiles %: 40-60 (water)
Solubility in water: partially soluble
SECTION IV FIRE & EXPLOSION DATA
Means of extinction: n/a
Sensitivity to mechanical impact/static discharge: n/a
Flash point (method): n/a (non-combustible)
Upper flammable limits % : n/a
Lower flammable limits % : n/a
Autoignition temperature: n/a
Special fire fighting instructions: n/a
Unusual fire and explosion hazards: Product will not burn but may splatter if temperature exceeds the boiling point.
SECTION V REACTIVITY DATA
Chemical stability: Stable
Incompatible materials: Will react with alkaline sensitive materials such as acids and certain metals. Contact with reactive metals such as aluminium or magnesium will result in the formation of explosive hydrogen gas.
Hazardous decomposition products: Avoid heating above 200oC. At elevated temperatures hazardous vapours can be released, including carbon monoxide, hydrogen chloride, organic acids and aldehydes.
Hazardous polymerization: Will not occur.
SECTION VI HEALTH INFORMATION
Exposure limit: n/a
Inhalation: n/a
Skin: adhesion
Eyes: adhesion, irritation.
Ingestion: Blockage of digestive and/or respiratory tract.
Chronic effects: n/a

LIQUID RUBBER VEZLAR MSDS
EMERGENCY AND FIRST AID PROCEDURES
Inhalation: n/a
Skin: This is an alkaline product. If splashed on the skin immediately wash thoroughly with fresh water. If the product has dried on the skin massage the area with medical grade mineral oil, baby oil or edible oil, then wash with soap and water. If irritation persists seek medical attention..
Eyes: Flush thoroughly with fresh water for at least ten minutes. Seek medical attention.
Ingestion: DO NOT INDUCE VOMITING. Seek medical attention.
SECTION VII SPILL PROCEDURES
In the event of a spill: Dike and contain, transfer to containers for recovery or disposal. Keep out of sewers.
Waste disposal method: Follow federal, provincial and local regulations regarding disposal.
SECTION VIII SPECIAL PROTECTION
Respiratory protection: n/a
Ventilation: n/a
Protective gloves: Recommended
Eye protection: safety glasses/splash goggles recommended
Other protective equipment: Long sleeves, loose clothing recommended.
SECTION IX SPECIAL PRECAUTIONS
Storage and handling conditions: Keep containers tightly closed when not in use. KEEP FROM FREEZING.
Special shipping information: Not regulated by the Transportation of Dangerous Goods Regulations.
Prepared by: Liquid Rubber Industries Inc.
Preparation date: 06-Jan-06
Replaces: 21-Sep-05

The information contained herein is based on available data and is provided for information only.
Liquid Rubber Industries Inc. and respective subsidiaries, makes no warranties, guarantees or conditions, expressed or implied, regarding the accuracy of the data or its use therein.
Liquid Rubber Industries Inc. including its subsidiaries, Liquid Rubber Australia Pty Ltd, will not be liable for any damages arising from the use of the information product described on this data sheet.
Product data is subject to change without notice. Unless otherwise stated, Liquid Rubber Industries Inc. and respective subsidiaries, sole warrantee shall be the replacement or refund of purchase price for any product found not to meet the above specifications.